Skip to content
Please CLICK HERE to register for dealer pricing!
Please CLICK HERE to register for dealer pricing!
ACR-2

ACR-2

by AUDIO CONTROL

AUDIO CONTROL (ACR-2) WIRED REMOTE LEVEL CONTROL 

Use this handy wired remote control with select AudioControl sound processors to change the overall level or bass output. Its 2-color LED glows brighter as you increase output, then dims as you dial it back. Mount it on your dash so you can make on-the-fly level adjustments. The package includes a 20-foot cable and a mounting plate.

PRODUCT HIGHLIGHTS:

  • Remote level/bass control for select AudioControl processors:
    • LCQ-1 6-channel line output converter
    • The Epicenter Plus bass restorer
    • LC7 line output converter
    • LCQ-1 6-channel processor
    • DQL-8 digital processor
  • 20' cable and mounting plate included
  • 2-9/16"W x 1-1/2"H x 2-1/2"D

FEATURES:

  • Overview:  This wired remote (ACR-2) controls either the subwoofer output level or the master volume of the AudioControl DQL8, LCQ-1, or the Epicenter Plus; which one is selected in the menu. The remote is designed to be dash mounted, within reach of the driver; it can be mounted under the dash with the supplied bracket, or the bracket can be removed and the knob and LED can be custom mounted through the dash. Pressing the knob engages the auxiliary input.
  • Mounting Options:  The dash  control may be mounted under the dash using its own bracket or through a custom hold in the dash. It should be within reach of the driver and in a spot where the LED is plainly visible
  • Bracket Installation:  The dash control mounts with two screws, which attach to the underside of the dashboard. Slide under the dash and place the dash control in its mounting position, mark the two mounting holes, drill pilot holes, and secure with two screws.
  • Custom Installation:  For that custom, finished look, the dash control can be flush mounted directly on the dash-board (or anywhere else). Disassemble the dash control from the mounting bracket. Start by pushing the LED from its holder followed by removing the circuit board and rotary control from the bracket. Drill a 9/32" hole in the dashboard for the control along with a 1/8" hole for the lock tab and a 13/54" hold for the LED holder. Reassemble the dash control components on the dashboard.